FAQs

The frequency depends on factors like climate and surroundings. Generally, once or twice a year is sufficient for routine maintenance.

Soft washing is a cleaning method that uses low-pressure water combined with specialized cleaning solutions to remove dirt, algae, mold, and other contaminants from surfaces.

Soft washing uses lower water pressure, typically below 250 psi, and relies more on cleaning agents to break down and remove contaminants. It's gentler on surfaces than traditional high-pressure washing.

Specialized detergents and cleaning solutions are used in soft washing to break down and eliminate organic growth like algae, mold, and mildew.

Most soft washing solutions are biodegradable and environmentally friendly.

Paver sealing involves applying a protective sealant to the surface of paved areas, such as driveways, walkways, or patios, to enhance their appearance and protect them from the elements.

Paver sealing provides several benefits, including enhanced color retention, protection against stains, prevention of weed and moss growth in joints, and overall increased durability.

It's advisable to seal newly installed pavers after they have settled, typically after a few weeks. For existing pavers, resealing every 4-5 years, or as needed, helps maintain their appearance and longevity.

Common paver sealers include water-based acrylics, solvent-based acrylics, and penetrating sealers. The choice depends on factors like desired finish, UV resistance, and the type of pavers.

Yes, sealers are generally compatible with various types of pavers, including concrete, brick, and natural stone. Ensure the selected sealer is suitable for the specific material.

Clean the pavers thoroughly, removing dirt, stains, and vegetation. Replace joint stabilization sand of the color of your choice. Allow the pavers to dry completely before applying the sealer.

Prior to our cleaning process we ensure we apply stripper to the entire area that’s going to be sealed to remove every bit of the failed sealer before we start our cleaning process.

Drying times vary based on the type of sealer used. Water-based sealers may dry within a few hours, while solvent-based sealers may take longer. Avoid foot traffic until the sealer is fully cured.

Roof soft washing is a method of cleaning roofs that uses low-pressure water and specialized cleaning solutions to remove stains, algae, moss, and other contaminants.

Soft washing is gentler on roofing materials, preventing damage that high-pressure washing might cause. It's particularly effective in removing organic growth like algae and moss.

Soft washing is suitable for various roofing materials, including asphalt shingles, tile, metal, and wood. The cleaning solution used is adjusted based on the type of roof.

The frequency depends on factors such as the climate and the prevalence of algae or moss. Generally, roofs may benefit from soft washing every 4-5 years for regular maintenance.

Yes, soft washing is designed to be safe for roofing materials. The low-pressure application eliminates the risk of damage, preserving the structural integrity of the roof.

Yes, the cleaning solutions used in soft washing not only remove existing growth but also have preventative properties to inhibit the future growth of algae and moss.

Soft washing solutions typically include a mix of water, surfactants, and specialized detergents designed to break down and remove organic contaminants without the need for high pressure.

We take precautions to protect landscaping during soft washing, such as wetting down plants before and after the process or covering them with plastic sheets.

Yes, regular soft washing can help extend the lifespan of your roof by preventing the buildup of damaging contaminants and reducing the risk of structural issues associated with organic growth.

A clean roof reflects sunlight more effectively, contributing to better energy efficiency by reducing heat absorption and cooling costs.